01
CNC machining
Drill or groove the panels to the requirements of the selected connector and joint.
DrillingConfirm specification
D002-1
A drilling-type connector for internal shelf connections in 16–25 mm panels.
Best evaluation fit: Concealed internal shelf structures in 16–25 mm panels.
Model D002-1- Process
- Drilling
- Applications
- Internal shelf connection
- Tensile
- Contact for value
- Shear load
- 260 kg
- Anti-detachment
- 200 N
- Machining route
- Drilling
- Applications
- 1
- Panel selection
- 16–25 mm
- Final assembly
- Contact for guidance
Where it fits
Application-specific data
Check the panel range for the exact joint before selection.
| Application | Panel thickness | Machining route |
|---|---|---|
| Internal shelf connection | 16–25 mm | Drilling |
Final assembly method
Confirm the assembly method for this joint.
Confirm the joint geometry, panel preparation and final assembly method with engineering before sample selection.
CNC machining and connector pre-installation are required before final furniture assembly.
02
Connector pre-installation
Install the connector components during furniture production and verify their orientation.
03
Tool-free final assembly
Align and engage the prepared panels at final assembly without an additional assembly tool, where the application has been validated.
Connection view
See how the connector sits in the joint.
Confirm orientation, panel relationship and assembly access before sample testing.
Internal shelf connection
Joint selection data
- Panel range
- 16–25 mm
- Machining
- Drilling
Performance data
Compare the published values
Use these figures to compare models, then test the selected connector in the intended board material and machining setup.
Tensile force
Contact for value
Load-bearing shear
260 kg
Anti-detachment force
200 N
Before production: Confirm the model-specific performance value with ConceaLynk before final selection.
Evaluation workflow
From technical page to pilot assembly
- Share the joint drawing
- Confirm machining and component orientation
- Prepare a sample set
- Validate the final assembly method
- Record fit, appearance and assembly results before production approval.
Buyer questions
Technical selection questions
Is D002-1 suitable for my application?
It is a candidate when your application, machining method and panel thickness match the data above.
Are machining dimensions available?
Contact engineering for the current machining reference and revision before preparing production tooling.
Can I rely on the listed forces for final design?
Use them for preliminary comparison, then conduct application-specific validation.
Engineering next step
Test D002-1 in your real assembly
Tell us which of the Internal shelf connection applications applies, along with panel material and thickness. We’ll use the product data to prepare the sample discussion and confirm fit in your production conditions.