01
CNC machining
Drill or groove the panels to the requirements of the selected connector and joint.
DrillingConfirm specification
T005-1
A dedicated drilling-type connector for thick back panel connections.
Best evaluation fit: Special back-panel applications reviewed with engineering before sample selection.
Model T005-1- Process
- Drilling
- Applications
- Thick back panel connection
- Tensile
- Contact for value
- Shear load
- Contact for value
- Anti-detachment
- Contact for value
- Machining route
- Drilling
- Applications
- 1
- Panel selection
- Contact for specification
- Final assembly
- Contact for guidance
Where it fits
Application-specific data
Check the panel range for the exact joint before selection.
| Application | Panel thickness | Machining route |
|---|---|---|
| Thick back panel connection | Contact for specification | Drilling |
Final assembly method
Confirm the assembly method for this joint.
Confirm the joint geometry, panel preparation and final assembly method with engineering before sample selection.
CNC machining and connector pre-installation are required before final furniture assembly.
02
Connector pre-installation
Install the connector components during furniture production and verify their orientation.
03
Tool-free final assembly
Align and engage the prepared panels at final assembly without an additional assembly tool, where the application has been validated.
Connection view
See how the connector sits in the joint.
Confirm orientation, panel relationship and assembly access before sample testing.
Thick back panel connection
Joint selection data
- Panel range
- Contact for specification
- Machining
- Drilling
Performance data
Compare the published values
Use these figures to compare models, then test the selected connector in the intended board material and machining setup.
Tensile force
Contact for value
Load-bearing shear
Contact for value
Anti-detachment force
Contact for value
Before production: Test the connector in your own board material, edge distance, machining tolerance and assembly conditions.
Evaluation workflow
From technical page to pilot assembly
- Share the joint drawing
- Confirm machining and component orientation
- Prepare a sample set
- Validate the final assembly method
- Record fit, appearance and assembly results before production approval.
Buyer questions
Technical selection questions
Is T005-1 suitable for my application?
It is a candidate when your application, machining method and panel thickness match the data above.
Are machining dimensions available?
Contact engineering for the current machining reference and revision before preparing production tooling.
Can I rely on the listed forces for final design?
Use them for preliminary comparison, then conduct application-specific validation.
Related by application
Compare alternative machining paths
Model T005-2Drilling
T005-2
A dedicated drilling-type connector for thick back panel connections.
- Application
- Thick back panel connection
- Thickness
- Contact for specification
Engineering next step
Test T005-1 in your real assembly
Tell us which of the Thick back panel connection applications applies, along with panel material and thickness. We’ll use the product data to prepare the sample discussion and confirm fit in your production conditions.