01
CNC machining
Drill or groove the panels to the requirements of the selected connector and joint.
Tool-free final assembly
Prepared in production. Assembled without extra tools.
Concealed connector components are installed after the required drilling or grooving. The prepared furniture panels can then be joined without an additional assembly tool in validated applications.
Assembly stages
- Production stage
- CNC machining and connector pre-installation are required.
- Final assembly stage
- Prepared panels engage without an additional assembly tool where validated.
How the system works
Three stages, one clear boundary.
Tool-free does not mean preparation-free. The machining route and connector position remain model- and application-specific.
02
Connector pre-installation
Install the connector components during furniture production and verify their orientation.
03
Tool-free final assembly
Align and engage the prepared panels at final assembly without an additional assembly tool, where the application has been validated.
Suitable furniture applications
Designed for manufacturing-led assembly.
Modular cabinets
Panel furniture
Flat-pack furniture
Kitchen cabinets
Wardrobes & closets
Custom furniture
Compatible model shortlist
Models with tool-free final assembly support
Compatibility still depends on the exact joint, machining route and panel range. Use the selector or sample testing before production approval.
Model D001-SDrillingTool-free final assembly
D001-S
A drilling-type connector for full cabinet assembly in 16–25 mm panels.
- Application
- Full cabinet assembly
- Thickness
- 16–25 mm
Model D001DrillingTool-free final assembly
D001
A drilling-type connector for full cabinet assembly in 16–25 mm panels.
- Application
- Full cabinet assembly
- Thickness
- 16–25 mm
Model D001-9DrillingTool-free final assembly
D001-9
A drilling-type connector for 45° miter and surface-to-surface joints, with an application-specific panel range for each joint.
- Application
- 45° miter joint / Surface-to-surface connection
- Thickness
- 18–25 mm / 16–25 mm
Model D002DrillingTool-free final assembly
D002
A drilling-type connector for concealed full cabinet assembly.
- Application
- Full cabinet assembly
- Thickness
- 16–25 mm
Model S001Slotting / groovingTool-free final assembly
S001
A grooving-type connector for full cabinet assembly in 12–18 mm panels.
- Application
- Full cabinet assembly
- Thickness
- 12–18 mm
Model S001-9Slotting / groovingTool-free final assembly
S001-9
A grooving-type connector for 45° miter and surface-to-surface joints, with an application-specific panel range for each joint.
- Application
- 45° miter joint / Surface-to-surface connection
- Thickness
- 18–25 mm / 12–18 mm
Model S002Slotting / groovingTool-free final assembly
S002
A grooving-type connector for full cabinet assembly in 18–36 mm panels.
- Application
- Full cabinet assembly
- Thickness
- 18–36 mm
Mechanical performance
Compare the model, then test the joint.
Drilling family
700 N
Tensile value for selected drilling-type models
Grooving family
900 N
Tensile value for selected grooving-type models
Validation
Sample
Test in the intended material and process
Engineering next step
Evaluate tool-free assembly in your own furniture structure
Share the joint drawing, panel material, thickness and machining route. We’ll prepare a model shortlist and sample discussion for your pilot assembly.